Contact Us
Hi,
If you have any suggestions for our blog, or want us to cover a tutorial or some project, do tell us. Leave a comment below and we will try our best.
And yes we do love it when we hear from our readers. Looking forward to your comments. Now I’m gonna stop typing right here before it starts sounding creepyish.
Skinny Satan 
hi
your turning wire in slayer excitor in primery and seconary is anti clock?
or pirimery is turning clock and secondary is anti clock?
The directions of turns won’t matter for secondary. For primary, keep it same as the secondary.
Hello Stan would like to build voltage multiplier not sure type of caps to be used need to be able to put out 6 kw Thanks
I want to learn about this joystick Shock controller IC: SD758-3AC4…The image of the circuit is in this URL:http://img844.imageshack.us/img844/9142/82789169.png
If you will zoom the image, you will find the same square IC….I crissed crossed entire Google, but in vain…No datasheet providing websites have it. I found also, that it is a chinese product probably distributed by Shehzen company…I tried to contact them, but in vain….Often Chinese electronics products are cheaper and therefore economical to experiment new pcb designs and interface….
Okay. The pic is not opening here. But here is what the controller does inside that joystick. It Only polls all the keys present on the joystick, gets the analog voltages from the analog sticks. checks the mode of the joystick that is analog or digital. And sends it to the master riding on the clock it provides.
You can make your custom compatible controller very easily using any simple microcontroller Ic’s. Just follow the protocol it is required by the joystick and do the bitbanging. If you need any help, comment back. Thank you